Science

If I was in a room made of mirrors, and I shut off the lights, why wouldn’t the residual light continue to bounce off the mirrors and illuminate the room?

No.

Because no mirror is 100% efficient. Every time it reflects light it absorbs a small amount of photons.

Also, once you start to look, the room will no longer be completely surrounded by perfect mirrors. It will need a little hole leading to your eye, which absorbs light that hits it as the first stage of sending a signal to your brain.

For the sake of argument, let’s say that you had a small hole (2mm diameter) in one of the walls and otherwise perfect mirrors around a very large room (10mx10mx10m).

You look in through the hole. Then it could take something like a second for the light in the room to drain away to your eye, enough time to get a clear visual image. After a few seconds, when almost all the original light had been absorbed by your eye, what would be left is a glow of infrared light, the thermal equilibrium spectrum at the temperature of your eye, about 310K. Of course, your eye isn’t sensitive to that, since if it were it would always just be seeing its own glow.


Because mirrors aren’t perfect, and light moves fast.

A typical mirror only reflects 80–90% of the light that hits it. That means that, every time the light hits and bounces, it loses as much as a fifth of it’s intensity. Now, exceptionally reflective (and expensive) surfaces can achieve up to 99.999% reflectivity, and that sounds great, because you’re losing only 1/100,000 part of the intensity with every reflection. That means it would have to reflect 70,000 times to become half as bright as it was originally. Problem is, if the room is big enough that it has to travel an average of 10 meters between reflections, it will have that many reflections in less than a quarter of a second. In a room that reflective, the light would remain bright enough to be perceptible for a second or two, but would quickly drop to nothing.

There’s another problem, though. The light being perceptible means that something is perceiving it, which means something has to absorb the light. If you’re in the room, every time some of the light hits your body, it’s almost all going to be absorbed. Even if you could somehow wrap yourself in equally reflective material, you can’t see the light unless at least your eyes are exposed, which means that the light that’s hitting your eyes is still being absorbed. And given the speed of light, it’s all going to hit your eyes in pretty short order. You might possibly have a room that took a fraction of a second to fade to true dark, but no more than that.

Having a room made of mirrors would make the light appear brighter, but that light still needs a source, or it’s all going to be absorbed quickly.

Related Posts

Why do we need an escape velocity to lift a rocket into space? Can’t a rocket just fly up at a constant low speed i.e. 60 mph and eventually reach space?

Well, in theory, you are right. In fact, your imaginary ship doesn’t need to go 60 mph, it could go 1 mph, so long as it could keep…

Since Jupiter is a gas planet, why can’t comets collide with Jupiter and pass right through it?

Jupiter is the largest planet in the solar system, with a diameter of approximately 143,000 kilometers and a mass 318 times that of Earth. As a gas giant,…

How does the Earth orbit the sun without losing energy?

Physics is hard to understand because it violates everyday observation, intuition, and common sense. Take “Newton’s First Law” as an example. It states that an object in motion…

What would happen if we poured 1 billion liters of water on Mars?

So – let’s get this into cubic meters. A liter is 1/1000th of a cubic meter – so we’re talking about a million cubic meters – which would…

The drinking duck is a common science toy in American physics classrooms and elsewhere

When you wet its head, it slowly lowers until it suddenly becomes almost horizontal, then straightens up after a jolt or two. If you put a glass of…

If we can squeeze 1 terabyte into a MicroSD card, why don’t we have standard sized hard drives that can hold thousands of terabytes of data?

Here’s a 128GB microSD card with the lid off. That black rectangle is the actual flash memory chip. You could probably fit at least 40 of these on…

Leave a Reply

Your email address will not be published. Required fields are marked *